Friday, April 25, 2008
Old Paper
Photobucket


1. Open up a transparent canvas., large enough to have extra space at the top, bottom and sides to work with.

2. Select your Marquee tool, and draw out a rectangle shape to the dimensions that you want your paper to be.

3. Set your foreground colour to e2c9a0 and your background colour to f9ebd7.

4. Go up to the Filter tab at the top and choose Render, then choose Clouds. You should have something similar to this:

Photobucket

5. Go up to the Select tab, and choose Deselect.

* Now we are going to make the edges a bit jagged, and add a few tears.

6. On the tools bar at the left, click on your Lasso tool.

* You may want to add a new layer and put a darker colour background behind your paper layer in order to see your paper edges better.
This next part is totally up to you to decide how much or how little you want your paper to have jagged edges and tears. I'm just going to tear off a corner, and maybe take a few little pieces out here and there.

7. Make sure your paper layer is selected in the layers palette. Click and hold down your lasso tool once on the outside of your paper layer and just drag your cursor to outline the top left corner of the paper. It doesn't matter what the lasso looks like on the outside of the paper corner, but the part that is actually touching the paper is how jagged it will look once you delete the actual corner.

Photobucket

8. Hit the Delete key on your keyboard.

9. Go up to the Select tab, then to Deselect.

10. Repeat these steps as many times on different parts of your paper to get the ripped or jagged look that you want. I did a few more and this is what I ended up with.

Photobucket

11. Select your Burn tool, and go up to the Brush Preset Picker and click the down arrow beside it to get a list of your brushes. Choose the one called Soft Round 200 Pixels, and change the diameter to about 150. Set Range at Shadows, and Exposure to 40%.

Photobucket

12. Make a few swipes with your large brush to give it a few darker shadows. This is what I ended up with.

Photobucket

13. Still working with your Burn tool, decrease the brush size to about 30 and change the exposure to about 50%. Do some swipes around the edges of your paper to burn those. This is what I ened up with:

Photobucket

* Stains, scratches, and dirt brushes are a good way of grunging up your paper a bit, so it doesn't look so smooth. I downloaded these brushes from ariadne-a-mazed at deviantart to get some waterstains.

14. If you haven't already, load the stain brushes. I used stain #12 at a size of 150, Range is set to Shadows and an Exposure of 90%.

15. Still using the Burn tool, position your brush somewhere on your page and click your mouse about 4 times in a row in the same spot.

* Take a look at your page, if you want it darker or lighter, click the Step Backwards button under the Edit tab 4 times to undo your water stain and try again. This is what I ened up with:

Photobucket

16. Continue on with your stains and scratches to dirty up your page. When satisfied with your look, hide your coloured background layer (if you have one) and Merge Visable.

17. Give your paper a texture. Go up to the Filter tab at the top, down to Texturizer and use these settings:

Photobucket

This is my final result:

Photobucket


* You can use this technique to make old frames, polaroids, ect.........

TOU:

If you do this tutorial, your end result is yours to do whatever you wish; give it away as a freebie, use it as part of a kit, or sell it for profit. You may not make this into an action or script to give away as a freebie or to sell for a profit. A mention or a link back here would be appreciated but is not mandatory. Please do not share the supplies or tut through email or any other means. If you are using this or any of my tutorials for your groups or as part of your own tutorial, please post a link to the tut on my blog and let your members download the supplies from my blog for themselves.
 
posted by Shawna at 7:18 PM | Permalink | 0 comments
Monday, April 14, 2008
Silky Sheen Alpha
Photobucket

These tutorial settings are for the people who have downloaded my Dusty Rose Kit from my freebie blog and would like to make the capitol letters to go with the lowercase ones from that kit. For those using a different colour, in step 2 choose a light colour, and in step 9 choose a darker shade of your original colour.

Supplies Needed:

Gold Sparkle.jpg and font. Both of which you can download HERE.


1. Open up a 500 x 500 transparent image in PS.
2. Set your foreground colour to CA8484.
3. Click on your Text tool and from the dropdown box, choose Christie. Font style is Regular, 100 point, and smooth.

* If you are using a different size, make sure you have extra room at the top, bottom and sides of your letter.

4. Click once on your canvas, type out a letter, and hit enter on your keyboard. (use the mover tool to positioin it in the middle if needed)
5. In the layers palette on the right, right click on your letter layer (not on the icon) and from the flyout choose Rasterize Type.
6. Hold down your Ctrl key on your keyboard and click once on the Icon in the layers palette to select your letter.

* Your letter should now have marching ants all around it.

Photobucket

7. Go up to the Layer tab at the top and choose New and then Layer.

* You should have a blank layer above your letter letter.

8. Working on the blank layer, go up to the Select tab at the top, then down to Feather. From the box that pops up, enter the number 10 and hit OK.
9. Next, go up to the Edit tab, then down to Stroke. Change your settings to the same as the picture below.

Photobucket

* This is what you should have on your canvas now:

Photobucket

10. Go up to the Image tab at the top, then down to Duplicate and hit OK.
11. In the layer palette on the right, click once on the original letter layer to highlight it, then hold down your Ctrl key on your keyboard and click once on the Icon of the letter.

* Marching ants should now be all around your letter.

12. Now, click once on Layer 1 (the outlined layer) in the layer palette.
13. Go up to the Select tab at the top, and then down to Inverse.

* You should now have marching ants all around your letter as well as all around the border of your canvas like in the picture below:

Photobucket

14. Now hit the Delete key on your keyboard once.
15. Go up to the Select tab at the top, and choose Deselect.

* This is what you should have now:

Photobucket

16. Right click on one of the layers in the palette and choose Merge Visable.
17. Open up gold sparkle.jpg from the zip file.
18. Go to the Edit tab at the top, and from the flyout choose Define Pattern. From the flyout, hit the OK button or give it a name of your choosing and then hit OK.
19. At the bottom of your layer palette, click on the Add a New Layer Style icon ( it looks like a grey circle with the letter f in the middle).
20. From the flyout choose Stroke. Change your settings to the same as the picture below.

Photobucket

* TIP: Before you merge visable your layers, click on the Outlined layer to select it, and in the layers palette, right above your letter icon you will see the word Normal. Click the arrow next to it and change the blend mode and see what you get. I've gotten some nice results with the Mulitpy and Overlay blend modes. Then merge visable your layers when you find something you like.

TOU:

If you do this tutorial, your end result is yours to do whatever you wish; give it away as a freebie, use it as part of a kit, or sell it for profit. You may not make this into an action or script to give away as a freebie or to sell for a profit. A mention or a link back here would be appreciated but is not mandatory. Please do not share the supplies or tut through email or any other means. If you are using this or any of my tutorials for your groups or as part of your own tutorial, please post a link to the tut on my blog and let your members download the supplies from my blog for themselves.
 
posted by Shawna at 1:53 PM | Permalink | 3 comments
Tuesday, April 1, 2008
My Favourite Photo Actions and Examples
This isn't exactly a tutorial, but I just thought I'd share some of my favourite actions that can add some amazing effects to your photos. A few of these actins are from Adobe Exchange and you may need to be signed in to your account to be able to view the links to them. If you don't have an account, you can go HERE and sign up for one.




B & W UNDER TINT: Download B & W Under Tint Action Here

Photobucket


1. Open your photo
2. Load BW Under Tint into the actions palette.
3. Click the down arrow next to the actions name, then click on BW Underex Tint and push the play button.
4. Push Continue after the discription message comes up.
5. The next message that come up is an option for you to change the Saturation of the picture. He suggests leaving it as is and just pushing continue, but instead of a saturation of -50 as suggested, in my example, I changed the saturation to -10. Push the Continue button to make your choice, then push the OK button.
6. The next message that pops up is an option for you to change the photo darker or lighter, or just accept the defaults if you like how it looks. Take note of all the default numbers in each section, then you can play around with the sliders to get a look that you like. Push Continue to make your choice.



B & BIG PICTURE by Panos: Download B & Big Picture Action Here

Photobucket

Photobucket

* This actions works with a Landscape, not a Portrait picture. If your picture is a portrait, just go up to the Image tab, down to Rotate Canvas, then click on
90°CW. When the action is finished, you can rotate it back to it's portrait position by repeating the steps but choose 90°CCW this time. Also, you can only have one image open while running this action. Close all other images except the one you are using this action on.

* This action has 4 different types to choose from. The first is B & Big Picture. It gives you a straight, broken up picture like in the first example below. The 3 others are called Perspective 1, 2 and 3. They each do the same, only they are slightly skewed in different ways. The second example picture above is Perspective 2. You must first run the B & Big Picture action on your photo before you use any of the other 3 perspective actions.

1. Open your photo.
2. Load B & Big Picture in the actioins palette.
3. Click on the down arrow next to it's name, then click on The B&Big picture below Copyright and push the Play button.
4. When it's finished, you can move or rotate ect... each individual section by clicking once in the layer palette on which ever piece you want to make changes to.



CLOUR VINTAGE PHOTO by JennyW: Download Coloured Vintage Photo Action by JennyW Here


She did an amazing job creating this action and I wish she would do some more. It's very real and lifelike. This works best on photo's bigger than 200 pixels in size.

The first action called Aged, will tint your photo, give it some cracks and stains, and put a jagged border around your picture.

The second action called Colour, will do all the same things as above, but it will also put a green tint to the background of your photo.

The third action called Bending, will bend your photo a slight curve to it.

The fourth action called Cracks, will put cracks in your photo and also give you the option of having a piece of your photo torn away.

You can use just one or a few of these in combination with each other to get amazing looking photos.


This is Just Aged:

Photobucket


1. Open up your photo.
2. Load Colored Vintage Photo by JennyW in the actions palette.
3. Choose Ageing and push play.


This is Aged and Bend:

Photobucket


Make sure the layer called Photoedge is highlighted in the layer palette.

1. Click on Bending in the action box.

* I got a popup telling me that "some aspects of the effect cannot be reproduced with layers". I just clicked ok and it was fine.


This is Aged and Cracks:

Photobucket


Make sure the layer Photoedege is selected in the layer palette.

1. Click on Cracks.
2. Next, you will get a message that says "rotate and move the selection to your desired position then hit Enter". Push the Continue button.
3. You will see a rectangle bounding box over some marching ants. The marching ants is going to be where your cracks/rip appear. You'll see from my example photo above that i only wanted one crack/rip going diagonally across the top of my image. I dragged the middle of the bounding box at the bottom off of my picture completely to get just the one crack. Set yours how you want it then push the Enter key on your keyboard.
4. Next, another message box pops up. This is if you want a piece of your image to appear as if it is torn away from the actual photograph. Push Continue if you want this effect, or push the Stop button to finish and leave it as is.
5. If you pushed Continue, you will see another bounding box over some marching ants. Move one of the little square nodes to make whatever size of the image you want to be torn away. You can use the arrow keys on your keyboard to nudge up, down, left or right.
6. When satisfied, push the Enter key.


This is Aged and Coloured:

Photobucket


This one is very simple, just select Colour in the actions box and hit play.



OLD PHOTO: Download Old Photo Action Here


This next action is also by the same creator, Jenny. It's called Old Photo, and it also has 4 different actions: Ageing, Cracks, Vertical Bend, and Horozontal Bend. It gives your photo a stained and aged look, with a very nice border, and it has a canvas type texture.

Aged Photo:


Photobucket


1. Open your image in PS.
2. Load Old Photo by JennyW in the actions box.
3. Click on Ageing.
4. When the ageing has finished, read the message that pops up and push the Stop button.


This is Aged and Cracks:


Photobucket


* After having my photo aged, I had a bit of trouble getting any of the other 3 actions to run properly. Every time I tried, it would give me an error message saying the cut command is not available, the move command is not available ect...... and when it finished, I ended up with a blank white square for my image. So, what I did was, I deleted the entire group of layers called All Layers. Click the group once to highlight it, then at the bottom of the layer palette you'll see a garbage can icon, click that. You may get a popup asking "Delete the group All Layers and it's contents or delete only the group? Click group and contents.

* Next delete the layer called Background too or you'll end up with a plain white square as well.

1. Make sure the layer called Old Photo is highlighted and go up to the actions box and click once on Cracks and hit the Play button.

*You will get a popup asking you to move the selection to your desired position. This is going to give you the option of making a couple of cracks in your photo. You will see a diagonal rectangle of marching ants over your image.

2. Press the STOP button on the message popup to pause the action and make our changes. You have 3 options next. First.....

a) If you want to seperate the top or bottom piece slightly from your image, have your Mover tool selected. Click once inside the rectangle of marching ants and drag downwards, upwards, or sideways, depending on what you want.

* Keep in mind that you can use your arrow keys on your keyboard to nudge your selection one pixel in any direction, just keep pushing the arrow to nudge. Push the Play button in the actions box when you are done.

OR....

b) Select your Rectangular Marquee tool on the tool palette on the left ( it is the very first icon). Then click on the middle of your photo and drag the rectangular marching ants around your photo and position it where you want. Whatever part of the marching ants are on your photo, that is where cracks will appear.
When satisfied with what you have, push the Play button again in the action box on the right.

OR....

c) Just hit Continue to accept the default cracks.


* This next part allows you to seperate a section from your photo. Have your Rectangular Marquee tool selected.

3. Click inside the marching ants, and move it around on your photo untill you find a position you like. Whatever part of your image is inside the marching ants, then that section will be slightly moved a few pixels away from your image, giving it a torn away look.

Push the Play button in the actions box when you have what you like.


This is VERTICAL BEND:


Photobucket


1. Click on Vertical Bend in the actions box and hit play.

* I got a popup saying "the command Unlink is not currently available". It's fine, just hit Continue.
* Another popup saying " the object layer background is not currently available." Again, hit Continue. It still works fine.

2. In the layer palette, just move the Shadow layer under the Old Photo layer.


This is Horozontal Bend:


Photobucket


Follow the same instructions as in the Vertical Bend from above.



GLAMOUR PHOTO: Download Glamour Photo Action Here

Photobucket


Just open your photo and push Play. I actually ran this action on the photo twice, merged visable layers, then use the unsharpen mask at the defaults. (Filter tab, Sharpen, then unsharp mask.)



STANDING PHOTO: Download Standing Photo Action Here

Photobucket


This has the option for using a Landscape or a Portrait photo. Just select which one you want and push the play button.

You will be asked to scale the layer effects, push the Continue button to do this. I left mine at the default 99.

Next, you will be asked to select a gaussian blur size for your photo. Read the information, and push the Continue button and make your selection.



SCOTCH TAPE: Download Scotch Tape Action Here


Photobucket

No need to have a photo opened for this. Just push Play and the action will open a new canvas of its own.

If you select the Mover tool or the free transform tool, you can make it bigger, smaller, skinny or fatter. Use the free transform tool to rotate it.



Deck by Panos: Download Deck Action by Panos Here


Photobucket

Very simple to use Load either Landscape or Portrait and just open your photo and push play.



Discrete by Panos: Download Discrete Action by Panos Here

Photobucket

This will put a white border around your photo with the option to change the colour and drop shadow.



Puzzle by Panos: Download Puzzle Action by Panos Here


Photobucket


You can choose to make your photo break into 4, 6, 20, 30, 56, or 100 puzzle pieces, and it gives you the option to change the bevel of the pieces as well. This runs on a Landscape image, so if yours is a portrait, go up to the Image tab, down to Rotate Canvas, then to 90°CW. You can rotate it back when the action has finished.

Just push play and follow the brief instructions



STAMP by Panos: Download Stamp Action by Panos Here


Photobucket


This uses a landscape picture format. Your image needs to be rotated 90°.

* This uses the enter key that is on your numeric keypad, not the regular enter key you would normally use.

When it gives you the option to change the country and number, press Continue to do this.

Make your changes then press the Enter key that is on your NUMBER PAD on your keyboard.

Next, it will give you the option of changing the date that appears on the stamp. Press Continue and then do this.

The next popup will ask you to change the colour of the country and number. Press Continue and then do this.

Next is the option to scale or rotate the stamp. Press Continue and make your changes.
 
posted by Shawna at 11:04 AM | Permalink | 3 comments